The 75PUS8807/12 is a 75 inch 4K TV from Philips, launched in the year 2022. It comes with a 10-bit IPS panel with Glossy finish.
The maximum resolution it can display is 3840 x 2160 with a refresh rate of 120 Hz and a pixel density of 59 ppi.
After screen size and resolution, the next important spec to look for in a display is its Color Reproduction (defined by its color gamut specification).
This TV doesn't come with a color gamut specification, so we have to make an assumption based on its panel type.
Now, since the TV features a big 75 inch screen, it won't come with a cheap panel, so here we can assume its equivalent sRGB coverage to be 90-100% or above. The color accuracy on this TV will be Lifelike! It will produce accurate colors AS IT IS intended.
What Color Gamut means ?
Color gamut spec of a display is the measurement of the range of colors that the display can produce.
A panel with poor color accuracy will produce washed out colors that will spoil the immersion.
It is specified in different units - sRGB,sRGB (standard RGB), NTSC, DCI P3 to name a few.
But you don't need to worry about that, here is a chart that you can use to choose a TV with good color accuracy.
Other than color accuracy, you should look at the static contrast specification as it impacts the picture quality the same way.
The importance of static contrast ratio
The static contrast ratio of a TV corresponds to its Black levels. A Display with low static contrast ratio (less than 1000:1) will not produce deep blacks. Moreover, such displays are likely to suffer from backlight bleeds such as this:The image is an example of another display, it is not this one
Clearly this will affect your experience considerably, especially in a dark room.
Other than black levels, a TV with high constrast ratio lets you to see more details. So, resolution and static contrast ratio go hand in hand in a sense.
If given a choice, I will prefer a FHD TV with high contrast ratio over a 4K TV with low contrast ratio.
This TV comes with a static contrast ratio of 8000:1., good enough to produce deep blacks and eye-catching visuals. For the record, it also comes with local dimming technology which is a plus.
HDR10, HDR10+, HLG (Hybrid Log Gamma) and Dolby Vision are also supported on this TV, so that's a plus.
As for brightness, it can go as bright as 250 nits, which is powered by Direct LED backlight.
If you are not into gaming, you can safely ignore these specs. But if you are also planning to use the TV for playing games or use it as a PC monitor, you should get a TV with the lowest input lag and response time.
The input lag on this TV is 9 ms and its minimum response time is N/A. So its a go-to TV if you are interested in gaming.
What is Input lag ?
This lag is the latency at which key-presses/mouse movements changes the content of the TV. Though, this won't matter much if you aren't into competitive/FPS games like call of duty.
Although for better experience, look for a TV that comes with an input lag and response time of < 20ms.
Dimensions and Ergonomics
The vertical and horizontal measurements of this TV are 66.47 inches and 39.27 inches respectively. Overall, it weighs approximately 22.5 kilograms. So plan your space accordingly.
Speaking of ergonomics — VESA mount is supported on this TV with an interface size of 400 x 300 mm. The unit doesn't come with either Swivel, Tilt or Pivot support.
Hardware and Audio
The chipset of this TV is powered by Quad Core (MediaTek MT9970A) CPU and comes with 4 gigabytes of RAM.
To power its UI, the TV runs Android 11 Operating System.
For display connectivity, Philips has provided two HDMI 2.0 ports and two HDMI 2.1 ports on this TV.
USB ports include 1x USB 2.0 and 1x USB 3.0. Other connectivity ports include — 1x Satellite In (Main — F-type female), 1x Antenna (RF) (female), 1x CI+ 1.4 and 1x Ethernet RJ45.
Wireless connectivity options on this TV include Wi-Fi (5Ghz + 2.5Ghz), Wifi-Direct and Bluetooth 5.0.
Coming to audio, it is packaged with 2 x 10W speakers.
As for power usage, it consumes 157.2W on average and 0.3W on standby.
For powering this unit, you'll require an 220 V - 240 V/50 Hz - 60 Hz outlet.