The 75P735 is a 75 inch 4K TV from TCL. It was launched in 2022. It features a 10-bit VA panel.
It can display a maximum resolution of 3840 x 2160 with a refresh rate of 60 Hz and pixel density of 59 ppi.
Picture Quality
After screen size and resolution, the next important spec of a display that impacts picture quality is its Color Gamut.
This TV comes with 75% DCI P3 color gamut coverage, which is equivalent to 102.27% sRGB coverage. Thus the color reproduction on this TV will be excellent! So your viewing experience would be immersive as this TV is capable of producing near accurate colors out of the box.
Understanding the Color Gamut Specification
Color gamut specification of a display is a measure of the range of colors that the TV can produce.
Put Simply, this specification determines the ability of a TV to produce accurate colors. A TV with low gamut coverage will miss out on some colors (such as deep red), so the image produced will look "washed out" in colors.
Different manufacturers use different units to define color gamut. Viz — sRGB (most popular), NTSC 1953, DCI P3 etc.
As for this TV its color gamut is specified in DCI P3.
But don't worry, below is a chart that you can use to choose a TV with good color accuracy.
Now, after color gamut, you should look at the static contrast specification as it impacts the picture quality the same way.
Understanding the static contrast specification
Static contrast ratio of a TV corresponds to its Black levels. A TV with low static contrast ratio (less than 1000:1) will not produce deep blacks. Apart from this, such displays often suffer from backlight bleeds such as below:
The image is an example of another display, it is not this oneObviously this will rob your experience considerably, especially in a dark room.
Other than black levels, a TV with high constrast ratio enables you to see more details. So, resolution and static contrast ratio go hand in hand in a sense.
This TV comes with a static contrast ratio of 5000 : 1., well enough to achieve deep blacks. For the record, it also comes with local dimming backlight which is a plus.
HDR10, HLG (Hybrid Log Gamma) and Dolby Vision are also supported on this TV.
As for brightness, the peak luminance it can achieve is 330 nits, which is powered by Direct LED backlight.
Gaming Performance
If you aren't into gaming, you can safely ignore these specs. But if you are also going to use the TV for playing games or use it as a PC monitor, you should get a TV that features the lowest input lag and response time.
The input lag on the TCL 75P735 is 15 ms and its minimum response time is 8.5 ms. It is good enough for both casual and competitive/FPS games.
What is Input Lag and Why it matters ?
This lag is the amount of time at which your inputs changes the content of your display. Though, this won't matter much if you aren't into competitive/FPS games like call of duty.
But ideally, look for a TV that comes with an input lag and response time of less than 20ms.
Ergonomics and Dimensions
Now, speaking of ergonomics — If you plan to wall mount the TV, you can make use of the VESA mount provided with this TV, which by the way has an interface size of 300 x 300 mm. Swivel, Tilt or Pivot features are not supported on this unit.
The vertical and horizontal measurements of this TV are 66.47 inches and 39.27 inches respectively.
In total this TV weighs approximately 21.8 KGs including its stand. Without stand, it weighs 21.3 KGs.
Hardware and Audio
The TV is powered by 4-Core CPU. There is no mention on the RAM on the TV's specsheet.
For display connectivity, TCL has provided three HDMI 2.0 ports and one AV Composite In 3.5 mm jack port on this TV.
For connecting USB devices, it includes 1x USB 2.0 and 1x USB 3.0. Other connectivity ports include — 1x Satellite In (F-type), 1x Antenna (RF), 1x CI+ 1.4 and 1x Ethernet RJ45.
Wireless connectivity options on this TV include a 5Ghz Wi-Fi, 2.5 Ghz Wi-Fi, Wifi-Direct, Bluetooth and DLNA.
The Audio unit of this TV is powered by 2 x 15W speakers.
As for power usage, on average, this TV consumes about 157.2 Watts. On standby, it uses 0.79 Watts.
Both 110V and 220V outlets are supported on this unit.